Qwen3.8-27B-AWQ-INT4-MTP-LowLatency

A latency-optimized INT4 (W4A16) build of Qwen/Qwen3.8-27B for interactive, thinking-off serving on vLLM: MTP speculative head kept intact and measured, lm_head in INT8, DFlash2 drafting verified, plus the serving flags that make this hybrid GDN+attention model's prefix cache actually hit.

Why this build. Most 4-bit checkpoints of this model are made and judged for throughput or benchmark accuracy. This one targets the other regime: real-time conversation (voice agents, embodied assistants, chat UIs) where a single GPU must turn a ~1.5 k-token prompt into a 20 to 60-token reply with very low time-to-first-token and per-turn latency, thinking off, one or a few streams at a time. The calibration data, the preserved MTP draft head, the INT8 output layer and the serving flags below were chosen for that use, and the figures on this page are measured end-to-end turn latencies rather than peak throughput.

TL;DR: 18.2 GB (BF16 base 55.6 GB) · INT4 symmetric g128, compressed-tensors, vLLM Marlin kernel on SM 8.0+ GPUs (Machete on Hopper) · vision tower + MTP draft head BF16, lm_head INT8 · zero-config in vLLM 0.24 through 0.32 · MTP verified working (64 to 73 % draft acceptance on chat traffic) · DFlash2 verified working with the official z-lab draft (10.0 ms per token on one RTX 6000 Ada) · with vLLM 0.30, MTP and --prefix-match-unit 16, an 18-token turn after a 1.5 k-token prompt takes 237 ms with TTFT 59 ms on one RTX 6000 Ada, down from 415 ms with the 0.24-era recipe; vLLM 0.31 gives 56 ms / 248 ms and vLLM 0.32 57 ms / 236 ms on the same recipe. Single stream, same harness for every number on this page.

Naming note: "AWQ" is the checkpoint class people search for (4-bit W4A16, same format and kernel path as AWQ-INT4 checkpoints). We built the same model with three algorithms on the same calibration data, AutoRound, AWQ and GPTQ, and measured them side by side; main ships AutoRound + INT8 lm_head, the AWQ and GPTQ builds are the awq-llmcompressor / gptq-llmcompressor branches (see Which algorithm). Serving speed is identical across the three by construction.

Quick start (vLLM 0.29 or newer; older versions below)

Recipe A: shortest TTFT, MTP off

vllm serve Twu31/Qwen3.8-27B-AWQ-INT4-MTP-LowLatency \
  --served-model-name qwen38 --max-model-len 12288 --max-num-seqs 8 \
  --enable-prefix-caching --prefix-match-unit 16 --mamba-ssm-cache-dtype bfloat16 \
  --reasoning-parser qwen3 --default-chat-template-kwargs '{"enable_thinking": false}'

One RTX 6000 Ada: TTFT 51 ms, 396 ms per 18-token turn. No prompt padding needed any more; see Prefix caching.

Recipe B: shortest turn, MTP on (recommended for chat)

vllm serve Twu31/Qwen3.8-27B-AWQ-INT4-MTP-LowLatency \
  --served-model-name qwen38 --max-model-len 12288 --max-num-seqs 8 \
  --enable-prefix-caching --prefix-match-unit 16 --mamba-ssm-cache-dtype bfloat16 \
  --reasoning-parser qwen3 --default-chat-template-kwargs '{"enable_thinking": false}' \
  --speculative-config '{"method":"mtp","num_speculative_tokens":2}'

One RTX 6000 Ada, vLLM 0.30.0: TTFT 67 ms, 273 ms per turn, 11.0 ms per token; after one prefix-warming call (below) 59 ms / 237 ms; later turns of a conversation land at 80 to 90 ms TTFT with 95 to 98 % cache hit. On 0.29.0 the same recipe gives 141 ms / 388 ms (89 / 276 warmed); 0.30 added the Mamba-state fixes for speculative resume (vllm#53945, vllm#55178). vLLM 0.31.0: TTFT 56 ms (71 ms for a 0.30.0 run on the same day), 247 ms per warm turn, 11.0 ms per token. vLLM 0.32.0: TTFT 58 ms (58 ms for a 0.31.0 run right before it), 237 ms per warm turn, 11.0 ms per token.

Recipe C: fastest decode, DFlash2 draft (long replies, single stream)

vllm serve Twu31/Qwen3.8-27B-AWQ-INT4-MTP-LowLatency \
  --served-model-name qwen38 --max-model-len 12288 --max-num-seqs 8 \
  --enable-prefix-caching --mamba-ssm-cache-dtype bfloat16 \
  --reasoning-parser qwen3 --default-chat-template-kwargs '{"enable_thinking": false}' \
  --speculative-config '{"method":"dflash","model":"z-lab/Qwen3.8-27B-DFlash2","num_speculative_tokens":7}'

The official draft (z-lab/Qwen3.8-27B-DFlash2, 5 layers, 3.85 GB) loads against this checkpoint's INT8 lm_head unchanged and gives 10.0 ms per token (K=7, 2.7 tokens accepted per step on chat). Its cost is TTFT: the draft's sliding-window layers switch off vLLM's fine-grained prefix hits for the whole model, so a 1.5 k-token prompt pays about 240 ms TTFT and about 400 ms per 18-token turn. Recipe C wins only on replies past roughly 150 tokens until vllm#53786 / vllm#57032 land, and only for one stream. Needs vLLM 0.29 or newer and about 4 GB more GPU memory (2.4 GB with the INT8 draft in Latency). K=7 beat K=3/4/5; the extra verification is nearly free at batch 1.

from openai import OpenAI
client = OpenAI(base_url="http://localhost:8000/v1", api_key="EMPTY")
r = client.chat.completions.create(model="qwen38", max_tokens=128, temperature=0.7,
    messages=[{"role": "system", "content": "You are a concise, friendly assistant."},
              {"role": "user", "content": "I've had a long day. Any quick tip to unwind?"}])
print(r.choices[0].message.content)

• No --quantization flag needed; vLLM logs Using MarlinLinearKernel for CompressedTensorsWNA16. On Hopper (SM 9.0) vLLM picks its Machete kernel for these layers instead, in 0.32 as in earlier versions; we have not measured Hopper.
• Check speculation is really accepting: curl :8000/metrics | grep spec_decode. MTP: accepted/draft ≈ 0.6 to 0.75 on chat; DFlash2 K=7: about 0.25, 2.5 to 2.8 tokens per step. A drafter that accepts 0 % is slower than speculation off.
• Text-only deployment: --language-model-only skips the vision tower (0.9 GB less). Not --limit-mm-per-prompt zeros, see Gotchas.
• On a shared GPU size the cache with --kv-cache-memory-bytes rather than --gpu-memory-utilization; profiling on a busy card under-estimates it. vLLM 0.31 and 0.32 still check free memory against --gpu-memory-utilization (default 0.92) at startup, so lower that too when another process holds a few GB.
• Don't pass --calculate-kv-scales on hybrid GDN models (vllm#37554). SGLang: see SGLang.
• Tokenizer and config files are byte-identical to upstream Qwen/Qwen3.8-27B.
• vLLM 0.32 needs Python 3.11 or newer and pins transformers to 5.16.1–5.19; pip install vllm gets the CUDA 13.0 wheel, and CUDA 12.9 wheels and -cu129 Docker images are on the release page.

Latency (measured)

Conversational prompts (≈1.5 k-token system prompt + 2 turns of history + a user utterance), greedy, thinking off, 18 prompts × 3 runs, streamed over HTTP, medians; "ms/tok" = inter-token latency; ~18-token replies; KV cache fixed at 10 GiB in every row. One RTX 6000 Ada 48 GB. Same weights in every row. Greedy replies are not bit-stable across runs: between any two of our runs, 0 to 6 of the 18 prompts got a different reply, including two restarts of the same vLLM version (torch.compile autotuning picks kernels by timing); persona tags and reply length were not affected.

Multi-turn conversations (5 × 4 turns, each turn appends the model's own reply, 0.30.0): Recipe A 45 ms TTFT on the first turn and 84 to 86 ms after; Recipe B 52 then 81 to 91 ms; Recipe C 251 then 264 to 295 ms.

Concurrency (c = 1 / 2 / 5 streams, each sending the 18 prompts, --prefix-match-unit 16; per-turn medians, aggregate tok/s at c = 5)

On 0.30 MTP no longer hurts multi-user serving; on 0.29 and older it roughly doubles the turn at 5 streams. DFlash2 is single-stream only on this card.

vLLM 0.32.0 (released 2026-10-18), measured back to back with a 0.31.0 control on the same card and night: each 0.31.0 arm ran right before its 0.32.0 arm. TTFT is the median over all 54 requests as above; warm turn = median of the second and third pass over the 18 prompts (prefix already cached), because the pooled 54-request turn median mixes in the cold first pass and moves with reply length.

0.32.0 is level with 0.31.0. The 9 to 12 ms shorter warm turns come mostly from replies half a token shorter (median 18.0 vs 18.5 tokens), not from faster steps. The hybrid prefix-cache fixes in 0.32 (vllm#55601, vllm#59759, vllm#59536) leave Recipe B's TTFT and its 96 to 98 % multi-turn hit rate where 0.31 had them. Greedy replies were identical on 42 to 51 of the 54 requests between the two versions, against 45 to 54 between two 0.31.0 runs on different days.

Multi-turn on 0.32.0: Recipe A 41 ms TTFT on the first turn and 79 to 80 ms after; Recipe B 51 then 81 to 82 ms; Recipe C 256 then 273 to 313 ms. Concurrency c = 1 / 2 / 5 on 0.32.0: A 402 / 396 / 410 ms (226 tok/s at c = 5), B 430 / 250 / 337 ms (273 tok/s), C 412 / 712 / 1591 ms (63 tok/s). MTP K=3 is unchanged (10.3 ms/tok, 2.85 accepted per step, warm turn 256 vs 237 ms for K=2), so K=2 stays the recommendation.

lm_head INT4 (lm-head-int4 revision) saves 4 to 8 % per token on this card (17.8 vs 18.5 ms MTP off, 9.2 vs 10.0 with DFlash2), less than the 20 % measured on an RTX 5090, and lowers DFlash2 acceptance a little (2.59 vs 2.74 per step); main keeps the INT8 head.

Quantized DFlash2 drafts. Twu31/Qwen3.8-27B-DFlash2-INT8-LowLatency is the z-lab draft with MLP, o_proj and fc in INT8 (main, 2.30 GB) or INT4 (int4, 1.51 GB). With this target at K=7: 9.0 ms/tok on 0.30 (9.5 / 9.2 on 0.29), acceptance unchanged, 1.4 to 2.2 GB less GPU memory. Replace "model" in Recipe C's speculative config to use it. Both load on 0.31.0 with the same acceptance, and 0.31.0 also loads drafts whose q/k/v are quantized (see Gotchas). Timed on fixed-length replies, a decode step takes 25.3 ms with the INT8 draft and 24.3 ms with INT4 against 27.1 ms with the BF16 draft (7 % / 10 % less), the same on 0.31.0 and 0.32.0 (re-test 2026-10-23 with Nsight Systems, details on the draft's card). An earlier version of this card said 0.32.0 removed the gain; that came from the 18-token medians, which move by up to 0.5 ms/tok from run to run.

Earlier measurements: vLLM 0.31.0 against 0.30.0, vLLM 0.24.0 recipe ladder and MTP sweep (RTX 6000 Ada), head precision and fidelity on an RTX 5090 (vLLM 0.27.1)

vLLM 0.31.0 against a 0.30.0 control (2026-10-07; 0.31.0 released 2026-10-05), measured back to back on the same card and morning. TTFT is the median over all 54 requests as above; warm turn = median of the second and third pass over the 18 prompts (prefix already cached), because the pooled 54-request turn median mixes in the cold first pass and moves with reply length.

Multi-turn on 0.31.0: Recipe A 42 ms TTFT on the first turn and 82 to 83 ms after; Recipe B 51 then 79 to 81 ms; Recipe C 256 then 269 to 304 ms. Concurrency c = 1 / 2 / 5 on 0.31.0: A 424 / 407 / 408 ms (231 tok/s at c = 5), B 432 / 250 / 326 ms (278 tok/s), C 412 / 695 / 1581 ms (64 tok/s). MTP K=3 decodes faster (10.3 ms/tok, 2.85 accepted per step) but its warm turn is longer (256 vs 247 ms), so K=2 stays the recommendation.

Serving-recipe ladder, vLLM 0.24.0, MTP off (block-aligned prompt padding is the pre---prefix-match-unit way to get the same hit rate)

MTP, vLLM 0.24.0: K=0 20.4 ms/tok → K=1 15.9 (79 % acceptance) → K=2 13.7 (73 %, 1.49×) → K=3 13.5 (61 %). Calibration data matters here: the same recipe calibrated on pile-10k reaches 57.9 % acceptance, on conversational transcripts 73.1 %; a community export without mtp in ignore loads a broken drafter and runs at 0 % acceptance, 1.5× slower than MTP off.

Head precision, fidelity and concurrency: RTX 5090 32 GB, vLLM 0.27.1 (NLL = per-token negative log-likelihood of the BF16 base's own greedy answers under the quantized model; lower = closer to BF16)

The levers that move decode latency cut bytes per token: INT8 lm_head −13 %, INT4 lm_head −20 %, INT4 MTP head −8 % (MTP on). Concurrency on this box (5 streams, MTP off): 394 ms/turn, 253 tok/s aggregate; with MTP K=2: 750 ms/turn.

Prefix caching on a hybrid GDN model

Qwen3.8-27B has 16 attention + 48 Gated-DeltaNet layers. vLLM sizes the attention block so that one attention page holds one GDN state, ceil(GDN state bytes / KV bytes per token) rounded to the kernel's alignment: 784 to 832 tokens with the default fp32 state, 400 with --mamba-ssm-cache-dtype bfloat16 (416 with MTP K=2, 448 with the DFlash2 draft; unchanged in 0.31 and 0.32). The GDN state is only stored at block boundaries, so by default a request reuses whole blocks and recomputes the tail of the prompt.

• --mamba-ssm-cache-dtype bfloat16 halves the state and the block (51 % → 79 % hit on 0.24, no output change on this workload). Keep it.
• --prefix-match-unit 16 (works on this model from vLLM 0.26) computes cache keys every 16 tokens and makes the prefill stop at the prompt's last 16-token boundary so the GDN state is stored there too; the next request sharing the prefix hits within 16 tokens of it. This replaces padding the system prompt to a block multiple: the unpadded prompt hits 99 %, TTFT 108 → 51 ms (MTP off) and 265 → 67 ms (MTP, 0.30). 16 divides every block size this model can end up with; 32 does not. vLLM 0.32 checks this at startup and refuses a unit that does not divide every block (vllm#58021); 16 passes.
• Prefix warming. The state lands at the end of whatever prompt was last prefilled, so register a fixed system prompt (plus history) once: send the rendered prefix, cut right after the last <|im_start|>user\n, to /v1/completions with max_tokens=1. Every later request starting with it hits there (59 ms TTFT with MTP on 0.30). In a conversation the previous turn's prompt is such a prefix automatically, which is why later turns land at 80 to 90 ms.
• MTP + prefix cache fell to 0 % on 0.24 to 0.27 because speculative steps never ended on a block boundary; with --prefix-match-unit 16 it hits 93 to 98 % on 0.29, and 0.30 also fixes the first turn (67 vs 141 ms); 0.31 lowers it to 56 ms, and 0.32 is level with 0.31 (58 ms for both in a back-to-back run).
• DFlash2 + prefix cache: the draft's five sliding-window layers use vLLM's SlidingWindowManager, which has no fine-grained lookup, and vLLM then disables fine-grained hits for the whole model (Disabling fine-grained prefix-cache hits because these KV cache managers require block-aligned lookups: SlidingWindowManager). Hits fall back to whole 448-token blocks, about 59 % on a 1.5 k-token prompt (vllm#53786, vllm#57032). Unchanged in 0.31.0 and 0.32.0.
• vLLM 0.32 removed --mamba-cache-mode all (vllm#58997); it was never implemented for Qwen3.5-family models. align, which --enable-prefix-caching selects on its own, is the only caching mode left, and in it the GDN state block is set to the derived attention block, so 400 is the floor.

Compatibility

Same checkpoint and harness, one RTX 6000 Ada. Decode speed is flat from 0.26 to 0.32 (18.5 to 18.7 ms/tok MTP off and 11.5 to 11.9 with MTP K=2 under default prefix caching through 0.31; 0.32 is within 0.1 ms/tok of a 0.31.0 control with --prefix-match-unit 16); versions differ in prefix-cache behaviour under speculation.

All five revisions load on 0.30.0 (0.30 removed the GPTQ g_idx kernels; the gptq-llmcompressor branch carries no g_idx): awq-llmcompressor 53 / 398 ms MTP off and 61 / 364 ms with MTP, gptq-llmcompressor 53 / 397 and 61 / 313 ms, mtp-int4-autoround (auto_round format via the inc backend, BF16 lm_head) 64 / 290 ms with MTP at 12.2 ms/tok. All five also load on 0.31.0 with unchanged MTP acceptance (awq-llmcompressor 2.22, gptq-llmcompressor 2.31, mtp-int4-autoround 2.43 accepted per step); the W4A16 layers still run on Marlin. On 0.32.0 all five load on Marlin with the same block sizes; TTFT / warm turn on an idle card: awq-llmcompressor 47 / 375 ms MTP off and 57 / 249 ms with MTP (2.31 accepted per step), gptq-llmcompressor 47 / 357 and 58 / 236 ms (2.31), mtp-int4-autoround 61 / 260 ms with MTP (2.45), lm-head-int4 18.0 ms/tok MTP off and 9.9 with DFlash2 (2.55).

SGLang

SGLang 0.5.20 (CUDA 13 wheels; tested with Python 3.12) serves this checkpoint without conversion: the compressed-tensors W4A16 body loads through SGLang's compressed-tensors path, the GDN layers get SGLang's radix cache for the recurrent state, and prefix hits stay fine-grained with the DFlash2 draft loaded, so DFlash2 does not pay the TTFT penalty it pays in vLLM (vllm#53786). Two SGLang facts set the recipe:

• SGLang's speculative paths (NEXTN/MTP and DFLASH) read lm_head.weight and refuse a packed head. main (INT8 lm_head) fails with 'ParallelLMHead' object has no attribute 'weight' (NEXTN) or DFlash2 selector requires a dense FP16/BF16/FP32 target lm_head (DFLASH). Use the mtp-int4-autoround revision, whose lm_head is BF16, for speculative decoding in SGLang; main serves without speculation.
• --disable-overlap-schedule is the TTFT lever at one to a few streams: 73 to 43 ms TTFT without speculation, 95 to 35 ms with NEXTN, and no loss at five streams.

uv pip install --prerelease=allow --index-strategy unsafe-best-match \
  --extra-index-url https://docs.sglang.ai/whl/cu130/ sglang

python -m sglang.launch_server \
  --model-path Twu31/Qwen3.8-27B-AWQ-INT4-MTP-LowLatency --revision mtp-int4-autoround \
  --served-model-name qwen38 --context-length 12288 --max-running-requests 8 \
  --attention-backend flashinfer --page-size 64 --mamba-ssm-dtype bfloat16 \
  --disable-overlap-schedule --mem-fraction-static 0.8 --max-mamba-cache-size 48 \
  --reasoning-parser qwen3 --default-chat-template-kwargs '{"enable_thinking": false}' \
  --speculative-algorithm NEXTN --speculative-num-steps 3 --speculative-eagle-topk 1 --speculative-num-draft-tokens 4

DFlash2 instead of NEXTN: replace the last line with --speculative-algorithm DFLASH --speculative-draft-model-path z-lab/Qwen3.8-27B-DFlash2 (block size 8 is read from the draft config). Without speculation, drop the last line and --revision; main then gives 30 ms TTFT and 18.7 ms/tok.

Same prompts and harness as the vLLM tables, medians of 18 prompts x 3, one RTX 6000 Ada 48 GB, overlap scheduler off, --attention-backend flashinfer --page-size 64 --mamba-ssm-dtype bfloat16. Most SGLang rows were measured while another process used the same GPU (about 70 % utilisation), so read them as conservative. The two rows marked ¹ were re-run with the launch command above and the GPU otherwise idle, back to back with vLLM Recipes A and B (TTFT within 4 ms of their tables): NEXTN steps 3 did not move (35 ms, 233 ms, 11.6 ms/tok), and no speculation on main went from 43 to 30 ms TTFT and from 21.7 to 18.7 ms/tok. The vLLM rows repeat the tables above, taken with the GPU otherwise idle. Where another arm was run twice the table shows both runs.

Multi-turn (5 x 4 turns), overlap off: no speculation 122 then 34 to 51 ms; NEXTN steps 3 50 then 40 to 42 ms; DFlash2 49 then 36 to 52 ms, 95 to 97 % hit throughout. Concurrency c=1/2/5 with --max-mamba-cache-size 48: no speculation (main) 572 / 461 / 436 ms per turn and 33 / 81 / 216 tok/s aggregate; NEXTN steps 3 394 / 292 / 313 ms and 44 / 111 / 279 tok/s; DFlash2 211 / 314 / 423 ms and 73 / 99 / 196 tok/s (vLLM 0.30 Recipe B: 426 / 250 / 327 ms, 267 tok/s at c=5). The concurrency harness uses 256-token replies and two rounds, so its c=1 row is not the 18-token table above.

Notes:

• The GDN state pool, not the KV cache, caps concurrency: the default extra_buffer radix strategy books 4 to 5 state slots per running request and the default pool is 16 slots, so the server logs max_running_requests is capped to 3. --max-mamba-cache-size 48 (about 75 MB per slot, plus verification buffers under speculation) serves 8 streams.
• SGLang sizes its pools from --mem-fraction-static times the memory that is free when it starts and measures the weights by the change in free memory while loading. On a GPU shared with a process whose usage moves, the sizing drifts and speculative launches can stop with Not enough GPU memory for hybrid (mamba/linear-attention) state cache or a 300-token input limit; 0.8 left enough room here. --max-total-tokens is a cap, not a floor, so it does not help.
• Rejected here: --page-size 16 (82 ms TTFT, 29.3 ms/tok), --attention-backend triton (85 ms, 29.3 ms/tok), the no_buffer radix strategy (no recurrent-state reuse, 584 ms TTFT), overlap scheduler on with NEXTN (95 ms, 16.8 ms/tok).
• The INT8 DFlash2 draft from the companion repo does not load in SGLang's DFLASH path (device-side assert; the INT4 one was not tried); use the z-lab BF16 draft there.
• First launch compiles FlashInfer kernels with nvcc (about 6 minutes here); later launches reuse the cache. SGLang's auto-round kernel decodes slower than the compressed-tensors path without speculation (25.6 vs 21.7 ms/tok, both measured before the idle re-run), which is why main is the no-speculation choice.

Which algorithm

Same base model, same calibration pool, same harness, same box (RTX 5090, vLLM 0.27.1); all rows with INT8 lm_head:

Serving speed is identical (same tensors, same kernel). Fidelity to BF16 is best for AutoRound, GPTQ close on NLL, AWQ slightly behind (a few prompts raise its mean; its median is in line; llm-compressor's AWQ mappings leave o_proj / linear_attn.out_proj unscaled). Treat the ordering as indicative, 18 prompts, coarse verbatim counts, flat MTP acceptance, not as a benchmark. (This box reads ~30 ms higher TTFT than the one used in the table above for the same main weights; compare within one table.)

What is quantized, what is not

Sizes: main 18.2 GB · lm-head-int4 17.6 GB · mtp-int4-autoround 19.0 GB · branches 18.2 GB. A 24 GB card serves text with a modest KV budget (--language-model-only frees another 0.9 GB); 32 GB+ is comfortable at 12 k context; add about 4 GB for the BF16 DFlash2 draft, 2.4 GB for the INT8 one.

Calibration & reproduce

530 sequences ≥ 2048 tokens rendered through the model's chat template with thinking off: ~60 % multi-turn conversational transcripts (assistant-persona system prompt + short colloquial turns, predominantly Chinese), ~20 % the same turns without a system prompt, ~20 % ShareGPT-GPT4 / UltraChat (zh/en). No benchmark test sets; the transcripts are not distributed and nothing from them is embedded in the weights. If your traffic differs (code, long reasoning), re-run the recipe on your own data; that is what moved MTP acceptance from 58 % to 73 % here.

# AutoRound (main)
auto-round --model Qwen/Qwen3.8-27B --scheme W4A16 --bits 4 --group_size 128 \
  --iters 200 --nsamples 384 --seqlen 2048 --batch_size 4 \
  --dataset "/path/calib.jsonl:apply_chat_template=false" \
  --ignore_layers "model.visual,linear_attn.in_proj_a,linear_attn.in_proj_b,re:.*mtp.*" \
  --format llm_compressor --enable_torch_compile --output_dir out/      # 1 h 14 min on one RTX 6000 Ada

# AWQ / GPTQ (llm-compressor 0.13.0)
ignore = ["re:.*visual.*", "lm_head", r"re:.*linear_attn\.in_proj_a$", r"re:.*linear_attn\.in_proj_b$"]
recipe = [AWQModifier(duo_scaling=True), QuantizationModifier(ignore=ignore, scheme="W4A16", targets=["Linear"])]   # AWQ
# recipe = [GPTQModifier(ignore=ignore, scheme="W4A16", targets=["Linear"], dampening_frac=0.01, actorder="weight")]  # GPTQ
oneshot(model=model, processor=tokenizer, dataset=ds, recipe=recipe, max_seq_length=2048, num_calibration_samples=256)
model.save_pretrained(out, save_compressed=True, max_shard_size="4GB")

Three things the exporters do not do for you: (1) keep the 15 BF16 mtp.* tensors in the checkpoint and add re:.*mtp.* to quantization_config.ignore; without both, vLLM's drafter loads garbage and MTP runs at 0 %, or the load fails outright (vllm#58807); (2) copy the upstream tokenizer files back verbatim, because save_pretrained in transformers 5.14/5.15 re-serialises tokenizer.json with an older pre-tokenizer regex (drops \p{M}, changes tokenization of scripts with combining marks); (3) the INT8 lm_head is applied post-hoc (RTN g128 via compressed_tensors, a group_1 scheme targeting re:.*lm_head$) because AutoRound's --quant_lm_head needs the 248 k-vocab logits in memory.

Gotchas

• YaRN: a dict --hf-overrides for rope_scaling / rope_parameters does not reach the MTP draft, and acceptance falls to 0 % past the native window (vllm#37435, vllm#58080); extend the context in a local config.json or keep MTP off past 32 k.
• DFlash drafts and context length: a draft with a shorter max_position_embeddings than the target reads out of bounds (vllm#57941, fix vllm#57964); the z-lab draft carries 262144 like the target.
• Quantized DFlash drafts: vLLM builds the draft's context-KV projection from the raw qkv_proj.weight, so quantized q/k/v fail to load on 0.29 and 0.30 (vllm#51581); keep q/k/v in BF16 there, as the INT8 draft above does. 0.31.0 runs a quantized qkv_proj through its quant method, and fully quantized drafts (INT8 or INT4 q/k/v) load with unchanged acceptance (2.75 per step at K=7); 0.32.0 does the same (2.75 to 2.78).
• Skipping the vision tower: --limit-mm-per-prompt zeros are left out of the torch.compile cache key (still open at 0.32.0), so a text-only start can load a graph compiled with the tower and fail with 'NoneType' object has no attribute 'size' (vllm#50891); --language-model-only is in the key and works.
• Adaptive verification (0.30 to 0.32) is rejected on the GDN attention backend.

Revisions

vllm serve Twu31/Qwen3.8-27B-AWQ-INT4-MTP-LowLatency --revision lm-head-int4 .... All revisions carry upstream-identical tokenizer/config files (earlier uploads had a transformers-resaved tokenizer.json).

Limitations

• Built and measured for short-reply, thinking-off, single/few-stream interactive serving; long chain-of-thought and > 32 k-context behaviour were not evaluated beyond the base model's claims. No academic benchmarks were run; the fidelity numbers above are relative to the BF16 base on conversational prompts.
• On vLLM 0.29 and older MTP roughly doubles per-turn latency at 5 concurrent streams (0.30 fixes this); DFlash2 is single-stream only. FP8 KV cache is not worth it here (only 16 of 64 layers keep KV, and it makes the cache block larger, not smaller).
• vLLM 0.32 dropped Python 3.10. vLLM 0.27.1 on Python 3.10 needs from __future__ import annotations at the top of flashinfer/comm/fd_exchange.py; fresh machines need g++ and python3-dev for the JIT kernels.

Acknowledgements

Qwen team for Qwen3.8; z-lab / Inco for the DFlash2 draft; Intel for AutoRound; the vLLM / llm-compressor / compressed-tensors maintainers.